|
|
|
AEM | Carbon Fiber | Clutches | DC Sports | Engine Mount Kits | FastBrakes | Honda OEM/JDM | Hondata | Jun | Nuformz | Portflow | RC | Skunk2 |
Prospeed is offering FastBrake kits which offer excellent performance at great prices. These kits are for the performance oriented enthusiast that wants either that little extra added breaking power from the standard 11" rotor kits, to the extreme performance breaking power of the 4 piston Wilwood Caliper kits. Civic/CRX 11" Kit For improved braking under all conditions, the Civic Integra caliper kit offers high performance with low cost Fits all 1984-2000 Civic/CRX/Del Sol and 86-89 Integra with the 9.5" disc brakes. Uses 1990-2000 Integra or Civic EX calipers. Requires 15" wheels. Most factory 15" wheels will fit. CNC machined 6061 T6 aircraft grade
aluminum mounting brackets Options: Complete kit with calipers: $279 Civic/CRX 4 Piston Caliper Kit
Now available is the Fastbrakes 4 piston caliper kit utilizing the Wilwood Billet Dynalite calipers. This kit will remove approx 8 lbs per wheel of unwanted weight. This kit will provide all the braking power and control you will ever need for less than other 4 piston caliper kits on the market. Fits all 1984-2000 Civic/CRX/Del Sol with the 9.5" disc brakes. Requires 15" wheels. Note: Will not fit some factory 15" wheels, a spacer approx 10mm thick may be required CNC machined 6061 aircraft grade
aluminum mounting brackets Options: Complete kit : $679 Civic/CRX Drag Only Kit
Now available is the Fastbrakes Drag Race kit utilizing the Wilwood Billet Dynalite single calipers. This lightweight kit will save over 10 lbs PER WHEEL when compared to the stock Civic brakes. Designed solely for drag racing, the components have been carefully matched to provide the necessary stopping power for cars with trap speeds up to 120 mph. Fits all 1984-2000 Civic/CRX/Del Sol with the 9.5" disc brakes. Note: This kit will require a wheel spacer of approximately 10mm to clear 13" drag wheels. CNC machined 6061 aircraft grade aluminum mounting brackets Options: Complete kit: $379 Integra Spec-R Kit
Available for the 1990-2001 Acura Integra. 3 Different types of upgrades are available. The first uses a stock 11" rotor redrilled to fit the Integra. this rotor has the same specs as the ITR rotor and will fit the factory 15" wheels. This rotor uses the 1998 or newer accord v6 caliper. The caliper bracket must be slightly modified to fit, which can be done in about 15 minutes per caliper. Rotor price: $65 each The second Integra upgrade uses a newly designed 2 piece rotor assembly. this rotor utilizes an 11" by 1" rotor (stock is 10.3 by .83) for greater braking power and heat shedding capability. Each rotor is silver cad plated to prevent rust. a CNC machined 6061 billet aluminum mounting hat is used for this rotor. Each hat is hard anodized for corrosion protection. this rotor must be used with calipers from the 91-98 accord wagon, Integra type r, 92-96 prelude VTEC, 97+ prelude (all models), plus a few other models. No modifications are necessary to use this caliper with the 2 piece rotors. 2 piece rotor price:
$355 per pair Finally for the very best in a bolt on rotor,
fastbrakes carries the StopTech AeroRotor. This 2 piece floating rotor is
designed to move more air through the rotor, making it ideal for the track.
keeping the rotors cooler extends the life and performance of a rotor, making
for more consistent lap times. Rotor price: $480 per pair Big Rear Kit
This 11.4" rear upgrade will provide more balanced braking for the serious driver. Due to the larger rotor, this system will provide additional rear braking, preventing excessive front end dive under severe braking conditions. Used in conjunction with the Fastbrakes front upgrade, these brakes will provide the best combination for the price available to the general public. 11.4" OEM quality rotors Complete kit : $179.95 Brembo Cross drilled and slotted front rotors Price: $140 pair |
|
Copyright © 2000-2002
Prospeed Performance
|
